The best choose Inflatable Rubber Dam for impound

1.environment friendly rubber dam. 2. reasonable price 3.enough experience for government projiect 4,high quality rubber dam

 

Inflatable rubber dams are cylindrical rubber fabrics placed across channels, streams and weir or dam crests to raise the upstream water level when inflated. The membrane is a multi-layer fabric made of synthetic fibre (usually nylon)and rubberised on one or both sides. The fabric is quite flexible and yet exhibits good wear-resistance characteristics. A layer of stainless steel mesh or ceramic chips can be embedded in the surface layer to reduce or prevent vandal damage.

Inflatable rubber dam can be filled with water, air or both. They are low pressure - typically 4 to 10 psi. The present trend suggests an increased use of air-filled membranes because they can be deflated or inflated more rapidly, and they are little affected by freezing conditions. Characteristic dimensions cover typically lengths of about 100 m with specially-made membranes up to 200-m wide, dam heights usually less than 5-m but some special designs might be up to 10-m high. The membrane is usually deflated for large overflows. It is however common practice to allow small spillages over the inflated dam. During overflows greater than 20% over-topping, vibrations might result from fluid-structure interactions,[1] and the instabilities might damage or destroy the rubber membrane. Several failures were experienced (e.g. CHANSON 1996). In practice, a deflector (i.e. fin) is installed on the downstream face of the rubber dam to project the nappe away from the membrane, hence preventing rubber membrane vibrations.

Material of Rubber Dam

  The rubber dam tube is made of strength canvas and rubber layer which ensure tightness of the rubber layers. The rubber layers encompass outer, middle and inner elements for different functions

Strength canvas

 

       The outer layer is made of the special rubber material characterized by wear, sunlight, heat and ozone-resistance.

         The middle layer is used for protection of canvas and for connection of 2 or more canvas with rubber layers

        The inner layer is used for protection of canvas and it is characterized by watertight and airtight features.

The outer, middle and inner rubber layers

 

      The cover rubber sheet is used to prevent the base board from leaking.  

The best choose Inflatable Rubber Dam for impound